How to Detect Leaks at Your Property

A small leak, about the size of a pin head, dripping at one drop per second can add up to 7 gallons of water a day.  A large leak, the kind most often found in toilets, can waste 200 gallons of water or more per day!  Check out the following when you suspect a leak.

Faucets

Check faucets in the bathroom and kitchen periodically.  Worn washers are m ost often the cause of dripping faucets.

Sprinkler Systems

Broken sprinkler heads or damaged underground pipes are common sources of sprinkler system leaks.  Watch your system run at least once per month to spot problems early.  Usually, leaks are easy to fix.

Toilets

Check toilets for leaks often.  The most common causes of a leaking toilet are:

1)  Float device set too high, which causes water to run into the overflow tube

2)  A warped or cracked flapper

Inexpensive toilet leak kits are available at home improvement stores.

Don’t forget to use your water meter to detect leaks.

Use your water meter to determine if you have a leak:

  • Make sure no water is being used inside or outside (no washing machine filling, no shower running, no watering outdoors, etc.)
  • Locate your water meter box.  Carefully remove the cover and lift the top of the meter.
  • Find the red Leak Indicator on the meter dial.  If all of your water sources are off and the Leak Indicator is rotating, you may have a leak.  Leaks can waste thousands of gallons of water in just a few days.  It pays to repair leaks promptly.

If you have repaired a leak please keep your receipts, they will be needed to determine if an adjustment is authorized.  To apply for an adjustment you will need to complete a Leak Adjustment Form and attach all receipts. The form is located under the “Leak and Pool Adjustment Information” section of this site.  You can either fax the Leak Adjustment Form and receipts to 770-918-6524 or bring them to the office located at 958 Milstead Avenue,Conyers, GA  30012.